You Searched for:
18th exactcentury in subject [X]
Results:  221 Items   Page: 2 3 4 5   ...  Next


MUSEUM OBJECT

Title:  
Mower
Description:  
Dimension:H:5.000in W:2.500in L:9.500in
Creator:
Jones, John
Dates:
ca. 1771
Abstract:  

Wooden model of white pine and mahogany with steel cutter. A large wheel that rolls along the ground has an integral pulley, through which it drives a vertical shaft having a four-bladed cutter at its lower end. (Robert P. Multhauf, "Catalogue of Instruments and Models," 1961).
Call #:  
58.1



MUSEUM OBJECT

Title:  
Fireplace
Description:  
Dimension:H:9.563in W:7.750in D:4.500in
Creator:
Unknown
Dates:
1790-99
Abstract:  

Complex wood model of fireplace combined with hearth. Oven is above fireplace and an incomplete tin stovepipe is above the hearth. Metal mechanism to lift flue sticking out of left portion of model. Covered in blue paper.
Call #:  
58.6



MUSEUM OBJECT

Title:  
Stove
Description:  
Dimension:H:17.500in W:9.188in D:7.000in
Creator:
Unknown
Dates:
1790-97
Abstract:  

Wood and cardboard model of stove. Three levels, including an upper chamber, probably for hot air, as well as the fire and ash boxes. There is no communication between the three chambers, nor between them and the double chimney consisting of two concentric flues. All walls are double. Two wire pulls. Side and top are labeled "Presented 3 November 1797" in handwritten ink. Two red seals are affixed to top of box, with monogram "AC."
Call #:  
58.7



MUSEUM OBJECT

Title:  
Elevator
Description:  
Dimension:H:26.000in W:9.750in D:9.375in Height extended: 73 (acc. to "Catalogue of Instruments and Models")
Creator:
Collin, Nicholas
Dates:
1791
Abstract:  

Mahogany model consisting of an open frame 18" high, enclosing three other telescoping frames of similar length, capable of extending to 73." Each frame is slotted to fit those contained within it. A windlass at the base operates the elevator through simple pulleys. The base has folding projections to increase the effective base area. Unmarked. (Robert P. Multhauf, "Catalogue of Instruments and Models," 1961).
Call #:  
58.19



MUSEUM OBJECT

Title:
Medallion
Alt. Title:  
Medallion with Portrait of Benjamin Franklin  
Description:  
Dimension:Dia:3.563in
Creator:
Unknown
Contributors:
Nini, Jean-BaptisteWalpole, Thomas
Abstract:  

Profile portrait-relief of Benjamin Franklin wearing a fur hat within a circular medallion. The upper surface of the medallion reads: "B. FRANKLIN / AMERICAIN" around image. Impressed on the tranche of the sitter’s shoulder "Nini / [illegible]" has been engraved, with an additional "1777" repeated below. A relief shield has been rendered to the right of these inscriptions; the shield is emblazoned with a lightning rod and thunderbolt and surmounted by a crown.
Call #:  
2009.18



MUSEUM OBJECT

Title:
Medallion
Alt. Title:  
Medallion with Portrait of Benjamin Franklin  
Description:  
Dimension:Dia:4.625in
Creator:
Unknown
Contributors:
Nini, Jean-BaptisteWalpole, Thomas
Abstract:  

Profile portrait-relief of Benjamin Franklin wearing a fur hat within a circular medallion. The upper surface of the medallion reads: "B. FRANKLIN / AMERICAIN" around image. Impressed on the tranche of the sitter’s shoulder "Nini / F1777" has been engraved, with an additional "1777" repeated below. A relief shield has been rendered to the right of these inscriptions; the shield is emblazoned with a lightning rod and thunderbolt and surmounted by a crown.
Call #:  
2009.19



MUSEUM OBJECT

Title:
Medallion
Alt. Title:  
Medallion with Portrait of Benjamin Franklin  
Description:  
Dimension:Dia:3.563in
Creator:
Heineringlen
Contributors:
Nini, Jean-BaptisteWalpole, Thomas
Abstract:  

Profile portrait-relief of Benjamin Franklin wearing a fur hat within a circular medallion. The upper surface of the medallion reads: "B. FRANKLIN / AMERICAIN" around image. Impressed on the tranche of the sitter’s shoulder "Nini / F1777" has been engraved, with an additional "1777" repeated below. A relief shield has been rendered to the right of these inscriptions; the shield is emblazoned with a lightning rod and thunderbolt and surmounted by a crown. "1797" and maker's name are marked on back. Finished to appear like bronze medal in ormolu frame.
Call #:  
2009.20



MUSEUM OBJECT

Title:  
Secretary
Description:  
Dimension:H:98.500in W:43.750in D:22.500in
Creator:
Unknown
Dates:
1770-80
Abstract:  

English mahogany secretary bookcase in two sections. Key-fret frieze molding and a pair of glabed doors of interlaced heart-and-diamond mullion work encloses the interior of wooden shelves. The lower section has a straight front of four cockbeaded drawers and is hinged to fall outward into a writing board. The interior of the desk houses a row of four small square drawers at each end; the center has a long drawer over three open shelves, flanked by a closed compartment with a plain door. (Murphy D. Smith, "Due Reverence," 1992). The upper section originally had a delicately carved and pierced swan's neck pediment with a central-urn finial suspended with swags adjoining the leafy rosette terminals above a central shell-carved plinth (now missing).
Call #:  
F25



MUSEUM OBJECT

Title:  
Desk
Description:  
Dimension:H:35.750in W:44.875in D:24.125in
Creator:
unknown
Dates:
ca. 1780
Abstract:  

Chippendale double-pedestal medical desk, ca. 1780. Molded rectangular top formed by a pair of hinged ends which open outward (each contains a lid and a storage space within). These flank a lift-up center section. Opened, a fitted work surface (covered with green baize, and a pigeonhold seciton with two ivory drawer pulls) is exposed with a fall-front mock drawer. All of this section surmounts a conforming cockbeaded wide drawer with continuous case moldings. The twin pedestals beneath are each fitted with a graduate series of three cockbeaded drawers which are flanked by large brass carrying-handles to the sides, all above a continuous deep base molding. (Murphy D. Smith, "Due Reverence," 1992).
Call #:  
F32-Desk



MUSEUM OBJECT

Title:  
Desk
Description:  
Bookcase: 24.5 x 35.5 x 10 Dimension:H:41.000in W:35.750in D:27.750in
Creator:
Unknown
Dates:
1790-99
Abstract:  

Rolltop desk and removable bookcase with glass doors. The tambour door with turned wooden pulls slides vertically up the tracked sloping sides, exposing the interior of six small drawers with fruitwood fronts fitted with ivory knob pulls. These small drawers are under seven black-paned pigeonholes. The baize-covered extendable writing surface, which pulls out to 21" deep with three mock drawers behind, is above a cockbeaded wide drawer with turned wooden pulls within three slender case moldings continuing along the sides. These are raised on ringed, slender, tapering, reeded round legs terminating the compressed globous ankles with tall peg feet. The upper section is a low cabinet of twin double-panel glazed doors enclosing an interior of adjustable shelves. (Murphy D. Smith, "Due Reverence," 1992).
Call #:  
1959.1



MUSEUM OBJECT

Title:  
Table
Description:  
Dimension:H:29.000in W:17.500in L:35.500in Width is closed Opened width: 35"
Creator:
Unknown
Dates:
ca. 1795
Abstract:  

Pair of inlaid mahogany folding top gate-leg card tables, possibly of Philadelphia manufacture. Each has a rectangular folding top with inset ovolo corners, inlaid with double-stringed edges and a broad band border above a conformingly shaped apron, inlaid with plain string reserves and slender banded edge, raised on stringed tapering square legs with crossband cuffs. (Murphy D. Smith, "Due Reverence," 1992).
Call #:  
F22-Table.01 to 02



MUSEUM OBJECT

Title:  
Table
Description:  
Dimension:H:28.750in W:25.000in L:42.000in Width (open): approx. 50"
Creator:
Unknown
Dates:
1790-99
Abstract:  

Federal drop-leaf Pembroke table. Single-plank rectangular overhanging top hinged with rounded shallow drop-leaves which can be raised on hinged swing supports, flanking a frieze drawer with a turned wooden pull above a cockbeaded edge molding. The table is raised on tapered reeded round legs which terminate in compressed globous ankles with deep peg-feet and turned at top with deep collars. (Murphy D. Smith, "Due Reverence," 1992).
Call #:  
F16-Table



MUSEUM OBJECT

Title:  
Table
Description:  
Dimension:H:28.500in W:21.500in L:32.000in Width (open): 40.25"
Creator:
Unknown
Dates:
ca. 1790
Abstract:  

Federal drop-leaf Pembroke table. Hinged oval drop-leaf is above drawered bow front and conforming mock-drawer reverse, flanked by light-wood inlaid corners simulating fluting. Square tapered legs have stringed borders and cross-band cuffs. Depicted in "Blue Book, Philadelphia Furniture." (Murphy D. Smith, "Due Reverence," 1992).
Call #:  
F23-Table



MUSEUM OBJECT

Title:  
Andiron
Description:  
Dimension:H:16.500in W:25.000in D:14.000in
Creator:
King, Daniel
Dates:
ca. 1770
Abstract:  

Etched acorn top set upon slender spool-turned section over festoon-molded square plinth. Plinth steps down into gadrooned apron-molding on cabriole leg with lozenge on knee and ends in delicately worked hairy paw-foot. Worked to top with bold dentate leaf border joining plinth base. Wrought-iron supports are surmounted with smaller conforming brass acorns and raised on tapered round legs with square feet. (Murphy D. Smith, "Due Reverence," 1992).
Call #:  
1976.4



MUSEUM OBJECT

Title:  
Ring
Creator:
unknown
Dates:
unknown
Abstract:  

Yellow gold ring with four round diamonds in bezel setting, forming a clover shape. Sides of ring are embellished. Diamonds are reputed to have come from miniature portrait of Louis XVI, given to Benjamin Franklin by the French king in 1785.
Call #:  
2011.1



MUSEUM OBJECT

Title:
Medallion
Alt. Title:  
Medallion with Portrait of Benjamin Franklin  
Description:  
Dimension:H:4.500in W:3.500in Oval
Creator:
unknown
Abstract:  

Profile bas-relief portrait of Benjamin Franklin in a fur hat, white on blue jasper dip with molded white bezel. "BENJAMIN FRANKLIN/ 1706-1790" in gold letters on rear of medallion. Stamped "Wedgwood" on back. After 1777-1779 model (possibly), which is after 1777 "fur cap" medallion by Jean-Baptiste Nini.
Call #:  
58.S.75



MUSEUM OBJECT

Title:  
Chess
Description:  
Board: 18.625 x 15 Pieces: 3.5 (tallest) Box: 4.25 x 11 x 6
Creator:
Unknown
Dates:
18th c.
Abstract:  

Board with 32 wooden pieces, 16 unfinished and 16 painted black, housed in original wooden box. Two pawns are later replacements. Pasted on inside of box lid is John Bartram's name. The board, while contemporary, is not original to the pieces.
Call #:  
01.C.57



MUSEUM OBJECT

Title:
Medallion
Alt. Title:  
Medallion with Portrait of Frederick Wilhelm Von Steuben  
Description:  
Dimension:Dia:3.125in
Creator:
Schrage
Contributors:
Du Simitiere, Pierre EugenePrevost, Benoit Louis
Dates:
1980
Abstract:  

White ceramic medallion, matte surface. Inscribed: "Friedrich Wilhelm/von Steuben/1730-1794/Schrage 1980"
Call #:  
2009.31



MUSEUM OBJECT

Title:  
Seal
Description:  
Dimension:D:0.250in Dia:2.438in
Creator:
Poupard, James
Dates:
1774-86
Abstract:  

Seal with image of well-dressed man introducing an American Indian to Minerva, goddess of learning. Indian wears a quiver of arrows and his head-dress appears to be a crest or pom-pom. Minerva wears her traditional helmet, holds a spear, and has a shield. At her feet are a telescope, globe, quadrant, and several open books. Beneath the figures appear the Society's motto "Nullo Discrimine." and its founding date "MDCCLXIX." Around the image are the words "The Seal of the Americ. Philos. Society held at Philad." With the copper embossing cut are an impression and a reproduction.
Call #:  
2009.34



MUSEUM OBJECT

Title:
Relief
Alt. Title:  
Relief with Portrait of George Frideric Handel  
Description:  
Dimension:D:1.750in Dia:8.375in
Creator:
Unknown
Abstract:  

Bas-relief portrait carved in wood. Inscribed "Hä" under neckband. Four holes positioned around perimeter of support for attachment when mounting.
Call #:  
2009.40



Page: 2 3 4 5   ...  Next